Комплекс мероприятий по монтажу/демонтажу КГШ на диски, а также по раскреплению/закреплению колес на транспортные средства. Проведение профессиональных шиноремонтных работ одноэтапным методом горячей вулканизации.

The process of designing building foundations using TSG systems is as follows. Initially, the dimensions of the foundations are set (for piles - the number, diameter and depth of the piles) and the temperature of the permafrost soils, which provides the required bearing capacity of the foundations. The required soil temperature must be provided by TSG systems.
At the same time, it is advisable to transfer soils to a hard frozen state in order to avoid deformations of foundations and floors. Verification calculations are carried out, as a result of which the final dimensions of the foundations, the temperature of permafrost soils and the characteristics of systems for thermal stabilization of soils are determined.
The use of semi-detached buildings with a width of up to 108 m with floors on the ground leads to a significant reduction in the building area, therefore, the costs of embankment construction, engineering communications, as well as the development and reclamation of quarries, reducing environmental impact and environmental payments are further reduced. In addition, the operating costs for the maintenance and heating of buildings are significantly reduced.
We will consider the economic effect of the use of foundations with GET temperature stabilization systems and floors on the ground using the example of five buildings of the EBP (Table 1). The ventilated underground is taken as an analogue. The cost savings for foundation construction includes the difference in capital costs and amounted to 124.68 million rubles.
реализованных проектов
единиц обслуживаемой карьерной техники
дней срок запуска проекта
единиц продукции - оборот КГШ
Комплекс мероприятий по монтажу/демонтажу КГШ на диски, а также по раскреплению/закреплению колес на транспортные средства. Проведение профессиональных шиноремонтных работ одноэтапным методом горячей вулканизации.
Поставка оборудования систему контроля давления и температуры (СКДиТ), мониторинг эксплуатации и сервисное обслуживание для поддержания КТГ оборудования.
Управления оборотом шин в парке клиента, учет и движение шин в оборотном фонде, анализ условий эксплуатации шин, статистика по наработке и себестоимости км-пробега каждой шины.
Подбор и поставка шин и дисков для каждого клиента с учетом конкретных условий эксплуатации.
Полное наименование организации | Общество с ограниченной ответственностью «Сибирь Спецшина» |
Сокращенное наименование организации | ООО «Сибирь Спецшина» |
Генеральный директор | Барсегян Арам Гегамович на основании Устава |
Юридический адрес | 672042, Забайкальский край, г. Чита, Угданский проезд, д. 100, строение 1 |
Почтовый адрес | 672042, Забайкальский край, г. Чита, Угданский проезд, д. 100, строение 1 тел.: 50-00-30 (менеджер); 55-90-00 (бухгалтерия) |
Электронный адрес | sibir.admin@sp-tyre.ru barsegyan.ag@sp-tyre.ru |
ИНН/КПП | 7524017861/753601001 |
ОГРН | 1137524000151 |
Банковские реквизиты |
Расчетный счет: 40702810604000058998 Сибирский филиал ПАО «Промсвязьбанк» г. Новосибирск К/с: 30101810500000000816 В Сибирское ГУ Банка России БИК: 045004816 |